Sylfirm X is a skincare treatment device that uses micro-needle radiofrequency (RF).
By adjusting the micro-needle depth to reach the skin layer and then applying high-frequency radiation to the target skin layer, various skin problems can be improved.The high-frequency radio frequency reaching the skin layer effectively stimulates the generation of collagen, leading to epidermal rejuvenation through the healing process of needle puncture wounds, thus achieving a dual effect.
Because high-frequency is irradiated through needles, there is minimal damage to the skin surface, and problems such as burns and inflammation are rare. Also, because treatment around the eyes is possible, it can care for the eyes to the utmost, making it suitable for those concerned about eye wrinkles and sagging.
WrinklessSlackDullnessUneven skin toneEnlarged poresAcne scarsMelasmaSkin texture improvement Redness
Approximately 60 minutes (including anesthesia time)
Sylfirm X is equipped with two wavelength modes.
PW(Pulsed Wave): Intermittent wavelength
CW(Continuous Wave): Continuous wavelength
Sylfirm X combines pulse width irradiation of two wavelength modes of high frequency, enabling selection of eight modes, designed to adjust to all skin types.
Using ultra-fine needles, we irradiate high-frequency PW (Pulsed Wave = intermittent wavelength). PW is the world’s first wavelength mode developed independently. Four modes are equipped according to skin quality.
In this mode, it is possible to approach the basement membrane, reduce capillaries, and approach fibroblasts that produce collagen. It improves melasma, overall facial dullness, uneven skin tone, and redness, bringing firming effects and balancing the skin condition. Since the skin texture itself improves, it is also ideal for aiming for resilient and healthy skin that is less prone to troubles.
MelasmaExtensive dullnessUneven skin toneRednessInflammatory acne
Using ultra-fine needles, we irradiate high-frequency CW (Continuous Wave) CW is a common irradiation method in conventional RF treatments. Four modes are also equipped according to skin quality.
In this mode, accelerated turnover due to wound healing effects from needle stimulation, skin tightening due to thermal coagulation, and improvement effects on acne scars can be expected.
For skin concerned about signs of aging such asDeep wrinklesFine linesUnder-eye saggingOverall facial saggingEnlarged poresDoible chinAcre scarsStretch marks
Continuous RF(CW) mode | Pulsed RF(PW) mode | |
---|---|---|
Wavelength | Continuous wavelength Four modes |
Intermittent wavelength Four modes |
Application range | Epidermis to deep dermis | Basement membrane to upper dermis |
Irradiation temperature | 55°C~60°C | 42°C~45°C |
Wound healing effect | Skin improvement, rejuvenation | Normalization of turnover |
Sylfirm X inserts fine needles into the skin and irradiates it with high-frequency energy. Unlike traditional lasers, it delivers energy only to the targeted area, allowing heat to penetrate deeper into the skin. This minimizes pain and surface damage, significantly reducing the risk of issues such as burns or inflammation.
The heat damage from high frequency stimulates collagen production through the wound healing process, increasing skin firmness and elasticity. This leads to the regeneration of beautiful skin on the surface.
Previously, treatments like IPL or laser therapy, which react with melanin pigments, were not suitable for certain skin types or sun-exposed skin. However, with Sylfirm X, these treatments are now possible for all skin types. Additionally, both pain and downtime during treatment have been substantially reduced.
While the tips attached to the head are disposable, please rest assured that they are never reused on different patients.
We primarily use the PW mode and will recommend the most suitable mode for you.
DDS:a treatment method based on mesotherapy principles aimed at introducing the minimal amount of medication into the necessary layers at appropriate intervals for supplementation.
The intentional needle-induced damage in Sylfirm X, along with the thermal damage from RF and collagen thermal coagulation, is naturally repaired. However, the natural healing process requires the necessary nutrients at the affected site. By introducing medications from the basal layer to the dermis using DDS, further therapeutic effects can be expected.
Although there are methods like oral medications and intravenous drips for drug delivery, they often result in the incorporation of necessary ingredients into internal organs or the bloodstream, making it difficult for them to exert sufficient effects on the targeted areas. Moreover, there’s an increased risk of drug toxicity.
Laser toning, which has made it possible to treat melasma, which was previously difficult to treat with laser therapy, is mainly used to improve melasma and age spots. Slyfirm X can be used to treat a wide range of skin problems, including acne scars, open pores, and redness, as well as age spots and melasma. The efficacy, pain intensity, and duration of effect vary greatly. If you have not been able to achieve results with laser toning, you can expect results with Slyfirm X. Please give it a try.
Sylfirm X | Laser Toning | |
---|---|---|
Method | Microneedle RF RF (radio frequency) is irradiated from a fine needle |
Removing surface pigmentation with a low-output laser |
Pain Intensity | ||
Melasma | ||
Pigmentation | ||
Redness | ||
Pores | ||
Fine Lines | ||
Acne Scars | ||
Downtime | ||
Persistent Effect | Long-lasting effects due to the promotion of collagen production | Temporary effects due to the destruction of melanin |
Approximately 60 minutes(including anesthesia time)
Recommended: 6 to 12 times
Some people may notice results after a few treatments, but it is difficult to expect dramatic changes after just a few treatments (1-3). The PW mode of Silfarm X is designed to cause moderate damage to the basal layer, which is the foundation of skin function, and then repair it. The ideal treatment period is at least six months to one year, so you are more likely to notice results if you receive 6-12 treatments.
Please make sure to inform your attending physician if any of the following apply to you.
First time | Following sessions | 3-session pack | 6-session pack | 12-session pack | |
Face only | 27,500 | 33,000 | 82,50027,500 per session | 158,40026,400 per session | 290,40024,200 per session |
Chin | 19,800 | 22,000 | 59,40019,800 per session | 105,60017,600 per session | 184,80015,400 per session |
Face + Chin | 38,500 | 44,000 | 115,50039,600 per session | 224,40037,400 per session | 422,40035,200 per session |
Chin + Neck | 30,800 | 33,000 | 92,40030,800 per session | 171,60028,600 per session | 316,80026,400 per session |
Face + Chin + Neck | 49,500 | 55,000 | 148,50049,500 per session | 290,40048,400 per session | 554,40046,200 per session |
First time | Following sessions | 3-session pack | 6-session pack | 12-session pack | |
Face only | 39,600 | 49,500 | 118,80039,600 per session | 231,00038,500 per session | 435,60036,300 per session |
Chin | 24,200 | 27,500 | 72,60024,200 per session | 138,60023,100 per session | 250,80020,900 per session |
Face + Chin | 56,100 | 69,300 | 168,30056,100 per session | 330,00055,000 per session | 633,60052,800 per session |
Chin + Neck | 40,700 | 44,000 | 122,10040,700 per session | 237,60039,600 per session | 448,80037,400 per session |
Face + Chin + Neck | 72,600 | 88,000 | 217,80072,600 per session | 429,00071,500 per session | 831,60069,300 per session |